Plug And Play ECOOBD2 Gasoline Car Fuel Economy ECO OBD2 Driver

Overview:

OBD2 is necessary for cars:

- Sold after January 1st, 1996 in the USA

- Sold after January 1st, 2001 in the European Union

- With a gasoline engine sold after January 1st, 2003

What does EcoOBD2 do?

According to your driving habits, EcoOBD2 creates a new map in the car's computer ECU for the vehicle's lower fuel consumption. As you drive more KM/Mile, EcoOBD2 renews the map and adjusts itself to perfectly match your car for more fuel saving.

What is EcoOBD2 Chip Tuning Box?

EcoOBD2 is a Chip Tuning Box which can be plugged into your car's OBD2 connector to decrease the fuel consumption of your car. When plugged into the OBD2 connector, EcoOBD2 receives information from the car's computer ECU. With the received data from the ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing, and pressure to decrease the fuel consumption of your car.

EcoOBD2 Chip Tuning Box does not exceed the manufacturer's requirements. It works only within the tolerance of the engine.

EcoOBD2 does not damage the engine and the car's computer ECU or cause any negative effects to the car's factory setting.

EcoOBD2 does not change any of the settings permanently. To return to the car's original settings, just unplug EcoOBD2 from the OBD2 connector.

EcoOBD2 Installation and Calibration steps:

1 - Pull the Car Key out from the ignition.

2 - Find the OBD2 connector(*) in your car and Plug in EcoOBD2

3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4 - Press the reset button for about 5 sec. After releasing the button, just wait for about 30-54 sec. (EcoOBD2 will communicate and establish a connection with the ECU)

5 - Start up the engine.

6 - EcoOBD2 will recognize your vehicle and your driving habits, after approximately 200 km/150 miles of driving, and thus EcoOBD2 will adjust itself to perfectly match your car for more fuel saving.

Does your car have an OBD2 connector?

On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990. OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.

Specifications:

Plug and Drive EcoOBD2 Economy Chip Tuning Box for Gasoline 15% Fuel Saving.

It works based on OBD2 protocols by remapping the Car's computer ECU.

After driving a total of 200 km, EcoOBD2 adjusts itself to the car, according to the driver's habits, and continuously remaps the ECU to save fuel and reduce emissions.

Package Content:

1pc x EcoOBD2 Chip Tuning Box Interface